Attaches to your Front Loader bucket in seconds with no tools! No drilling, etc. required!
Advantages of this system:
Fits almost any loader.
Installs in seconds with no modifications to your tractor or loader.
Installs with no tools.
Allows your loader to remain on the tractor and available for use in about 15 seconds.
Blade floats independent of the loader bucket.
The loader can apply down pressure if needed for removal of packed snow or ice.
The angle of attack of the blade can be changed by manipulation of the loader bucket.
Can be offset approximately 8 inches to either side to allow snow to be pushed farther off the road.
Ships UPS or FedEx Ground right to your door eliminating the hassle and high cost of Motor Freight.
The blade is 60" wide, approximately 21" high.
The blade angles 0, 15 or 30 degrees left or right.
The moldboard is sturdy steel and is equipped with trip springs and a replaceable edge.
Cutting edge is replaceable and is made from heavy 3/8" thick steel.
Heavy duty cast skid shoes are available.
Standard color is Charcoal Gray. Orange, Red, Blue or Yellow Blades are available.
Wheeled storage dolly (cart) is available to make storage and installation a breeze.
Standard blade complete with mounting system, 3/8" steel cutting edge, and all hardware: $949
Heavy duty cast skid shoes: $85.
Optional paint color: Orange, Red, Blue or Yellow: $50
Note to International Customers: Please contact us for shipping costs. Email email@example.com or phone 704-435-0650
Rob Gilchrist on 02/12/2015 09:57pm
I just traded in my BX24 for a B I kept the plow, the lights, the bucket hooks , thumb, tool case everything made BYBXpanded. Great stuff outlasted my tractor and be as good as new on the new B!
Scott Houser on 01/25/2015 10:44am
I used the 60 inch snowplow for the first time in January. It worked better than I expected. I contemplated buying this product for a long time. It makes clearing snow much easier. I highly recommend this plow. I also bought the dolly which allows moving the plow around with ease.
Bob Carpenter on 01/14/2015 09:58pm
I live in the Colorado Rockies and I have a long driveway. I've always had problems getting the heavy snow far enough off the driveway! This Blade makes plowing so much easier! Thanks Guys !!!!
George Gordon on 09/30/2014 09:42am
Received my 60" snow blade with skid shoes yesterday noon. Assembled the blade assembly in a couple of hours in the afternoon. put it on the tractor this morning. It is 9 AM and I am ready for the first snow. In no hurry though I will be patient Amazing engeneering. Would recomend to anybody.
Rob on 01/14/2014 01:31pm
After using a heavy makeshift plow from a Jeep on my BX23 previously, this plow is a dream to use. I have a gravel driveway and it will scrape it down really well. With the skid shoes I can plow a path across my lawn without damaging it.
I had a couple of questions when I first received it because my bucket had some modifications (bucket hooks) and I needed to figure out how to mount it. I received terrific support by email and telephone. An unmodified bucket will have no trouble with this plow.
The plow's assembly was simple and I had it from box to on the tractor in just a few minutes. It was delivered really quickly, too.
Bottom line: BUY THIS PLOW! :) The product and (pre- and post-sales) support are great.
steve waldo on 01/03/2014 08:31pm
I have now plowed about 4 feet of snow in 5 storms (heckofa start to the winter here!!) , some wet, some dry and I like the plow even more each time.
steve waldo on 01/03/2014 08:26pm
I received my 5' plow on a Friday PM, was out of town Saturday, and woke up Sunday to a 16" covering of nice dry snow, went to the shop at 8AM, unpacked, assembled and attached it and was plowing by 8:35AM. It took a while to figure the correct height and angle - I have about 1000' feet of, once upon a time, gravel driveway. Rutted and potholed. In Vermont. After a bit of practice I have gotten reasonably proficient at it. Always used a blower before but the gravel tears them up, more time repairing than moving snow.
In short this is what I dream of - simple, efficient, and very well built. Great design. Kubota dealer show me a very similar one, not as well built and held on with a pair of c-clamps. $1500.00!!!!
BXPanded plow is attached or taken off in seconds, stays in place well, has 5 angle positions (3 on the dealers plow) and functions like it should. Simple and efficient. And the price is more than reasonable.
All this is only a prelude to the absolute best part of doing business with BXPanded - Mr. Harry Clearman! I say without reservation or prompting he is the most accessible, responsive gentleman I have had the pleasure of dealing with. I assume he must be the engineering master behind these products as his knowledge of his wares is all apparent.. You make an inquiry, you don't reach someone in a foreign country, clueless as to what you need. No, you get answers and explanations. A true delight to deal with. Thank you, Harry, once again.
This is my 3rd product I have purchased thru BXPanded, and should I find an excuse to need any others they offer, I will not need to research; they have earned my business and loyalty.
Richard Martin on 11/06/2011 12:50pm
Finally used snowplow during freak northeaster in ct. Very easy to hook up. Just had to change chainbinder bolt location in achieve correct tension. Worked great! I also opted for the AR400 cutting edge and skid shoes. Well worth the money. Came UPS to my door. Easy to assemble. Very satisfied.